C-Dax C-DIT400 Owner's Manual

OWNER’S MANUAL FOR THE GROUND DRIVEN SPREADER C-DIT400 C-Dax Ltd PO Box 1010, 145 Harts Road Tiritea, Palmerston North Ph:06 354 6060 Fax

10 MAINTENANCE The following maintenance actions are mandatory for reliable use of the spreader. Before Use Check the tyre pressures and charge wit

11 PARTS DIAGRAM

12 PARTS LIST Item No. QTY. e9 part no e9 description 1 1 1036-8240 Agitator-Spreader-CDIT300/400-In-Ex300/400-SS 2 1 1110-2308 Ball-End-Inte

13 43 4 3310-2810 Fastener-Washer-Flat-M10x32x2.5-Grade 316-Stainless 44 4 3310-6005 Fastener-Washer-Flat-M5-ZP 45 1 3310-6008 Fastener-Wash

2 SAFETY PRECAUTIONS CDIT400 AN IMPORTANT MESSAGE FOR OWNERS & OPERATORS OF C-Dax ATTACHMENTS/ACCESSORIES Be warned of the dangers of loading

3 SAFETY PRECAUTIONS Before attempting to install or operate the equipment, read and understand the manual thoroughly. Failure to comply with this

4 C-Dax CDIT400 OWNER’S MANUAL (Pt.No.2400-5610 Issue 11 Dated Feb 2015) TABLE OF CONTENTS 2 Safety Precautions 4 Table of Contents 5 Introdu

5 INTRODUCTION Congratulations. You have just purchased an advanced spreader from C-Dax Ltd. C-Dax Ltd is committed to providing you, the farmer, wi

6 LIABILITY The maximum liability, which is accepted by C-Dax Ltd, is limited to replacement of faulty goods only. Every care has been taken in th

7 OPERATION The product to be spread is placed in the hopper. When the spreader is towed forward, the right hand wheel drives through the lever oper

8 CALIBRATION 1. Ensure the control handle is fully back (clutch disengaged, shutter closed). 2. To calibrate your spreader, place a measured amo

9 OPERATING THE SPREADER When the spreader has been correctly calibrated, the hopper may be filled to the required level and spreadi